OCS 2007 Hata
- Kim tarafından: mshowto_twitter
- Kategori: Microsoft
İyi çalışmalar
Windows 2003 üzerine OCS 2007 Standart edition kurduk Validate Front end server yaptığımızda aşağıdaki hatayı alıyoruz Sunucu sadece Domain member Üzerinde CA kurulu Ortamda 1 adet Root sertifika sunucusu mevcut OCS kurulu makinede Yan sertifika yetkilisi olarak kurulu.
Maximum hops: 2
Successfully established security association with the server: User administrator Domain inviso.local Protocol NTLM Target invsrv05.INVISO.LOCAL
Failed to register user: User sip:administrator@inviso.local @ Server invsrv05.INVISO.LOCAL
Failed registration response: [
SIP/2.0 404 Not Found
FROM: ;epid=epid01;tag=961cb27636
TO: ;tag=E25E16B6259CDBE57DAD28E06C9BCAE4
CSEQ: 5 REGISTER
CALL-ID: cc9874e94f4349c69f05046a85186d2a
VIA: SIP/2.0/TLS 192.168.25.153:4772;branch=z9hG4bKf14e506d;ms-received-port=4772;ms-received-cid=D00
CONTENT-LENGTH: 0
AUTHENTICATION-INFO: NTLM rspauth="010000002A8648864EC437A7399D6494", srand="FC61F467", snum="1", opaque="46531D6B", qop="auth", targetname="invsrv05.INVISO.LOCAL", realm="SIP Communications Service"
ms-diagnostics: 4005;reason="Destination URI either not enabled for SIP or does not exist";source="invsrv05.INVISO.LOCAL"
]
Suggested Resolution: Use the maximum hop count to determine the server that generated this error. For example, if the maximum hop value is 2, then it is likely that this error was generated by a server that is 1 (immediate target) or 2 hops away. If the target server supplied and the home server for the user are different check the trust relationship between them. If the target server is an access edge server then check whether the internal supported domain list contains the domain of this user. In addition, check the forest-level domain supported list and make sure the user domain is present. Finally, run the dbanalyze tool on the home server to check whether the user is homed and configured correctly.
Suggested Resolution: If authentication failed, then make sure the user is SIP-enabled and is homed properly.
İyi çalışmalar
Windows 2003 üzerine OCS 2007 Standart edition kurduk Validate Front end server yaptığımızda aşağıdaki hatayı alıyoruz Sunucu sadece Domain member Üzerinde CA kurulu Ortamda 1 adet Root sertifika sunucusu mevcut OCS kurulu makinede Yan sertifika yetkilisi olarak kurulu.
Maximum hops: 2
Successfully established security association with the server: User administrator Domain inviso.local Protocol NTLM Target invsrv05.INVISO.LOCAL
Failed to register user: User sip:administrator@inviso.local @ Server invsrv05.INVISO.LOCAL
Failed registration response: [
SIP/2.0 404 Not Found
FROM: ;epid=epid01;tag=961cb27636
TO: ;tag=E25E16B6259CDBE57DAD28E06C9BCAE4
CSEQ: 5 REGISTER
CALL-ID: cc9874e94f4349c69f05046a85186d2a
VIA: SIP/2.0/TLS 192.168.25.153:4772;branch=z9hG4bKf14e506d;ms-received-port=4772;ms-received-cid=D00
CONTENT-LENGTH: 0
AUTHENTICATION-INFO: NTLM rspauth="010000002A8648864EC437A7399D6494", srand="FC61F467", snum="1", opaque="46531D6B", qop="auth", targetname="invsrv05.INVISO.LOCAL", realm="SIP Communications Service"
ms-diagnostics: 4005;reason="Destination URI either not enabled for SIP or does not exist";source="invsrv05.INVISO.LOCAL"
]
Suggested Resolution: Use the maximum hop count to determine the server that generated this error. For example, if the maximum hop value is 2, then it is likely that this error was generated by a server that is 1 (immediate target) or 2 hops away. If the target server supplied and the home server for the user are different check the trust relationship between them. If the target server is an access edge server then check whether the internal supported domain list contains the domain of this user. In addition, check the forest-level domain supported list and make sure the user domain is present. Finally, run the dbanalyze tool on the home server to check whether the user is homed and configured correctly.
Suggested Resolution: If authentication failed, then make sure the user is SIP-enabled and is homed properly.
mshowto_twitter
2 ay önce gönderildi
Merhaba,
AD and SQL is not in Sync with the OCS user details. We need to force the Sync
through “RegenerateCookiesNow” option. Since this operation may affect the
performance of OCS, I would recommend to run this on off business hours.
Forcing RegenerateCookiesNow:
Login to Front End server which is the current user replicator
1. Click Start, and then click Run.
2. In the Open box, type wbemtest.
3. In the Windows Management Instrumentation Tester dialog box, click Connect.
4. In the Connect dialog box, type root\cimv2 in the Namespace box.
5. Click Connect.
6. Click Open Instance.
7. In the Get Object Path box, type MSFT_SIPUserReplicatorSetting, and then click OK.
8. In the Object Editor for MSFT_SIPUserReplicatorSetting dialog box, click Instances.
9. Scroll down to the list of properties until you see the RegenerateCookiesNow property and double click that
10. Enter TRUE for its new value and click Save Property
11. Click Save Object
12. Click Close
13. Click Exit
More info on the
To find the user replicator server :
Login to any of the Prod pool FE server.
Make sure you have OCS 2007 Resource kit installed
From the command prompt go to the folder where reskit installed.
Type “dbanalyze /report:diag >dbanalyze.txt ”
Open dbalalyze.txt and search for “Task name”
Will get the User Replicator server name.
Emre Aydın